Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I tried to simulate ASA with 3 interface (inside=Sec.L.100; outside=sec.L 0; internet; sec.L=0). I configured ipsec remote access vpn (ikev1). what i tried to achieved is for the internet client to access the outside network. using the PC at ...
hi guys,it's on the routing issue. i successfully established connection after adding static route to router located on outside int. thank you very much for your help.
hi sir,here's the result:ciscoasa# sho crypto ipsec sa interface: internet Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: 172.1.1.1 local ident (addr/mask/prot/port): (0.0.0.0/0.0.0....
Hi Mr. Mashal and Marius,i tried to use the packet tracer command as advise and here is the result.ciscoasa# packet-tracer input internet tcp 192.168.10.1 12345 192.168.145.100 80Phase: 1Type: ACCESS-LISTSubtype: Result: ALLOWConfig:Implicit RuleAddi...
Hi Mr. Marius,thank you for your reply. yes, vpn is at 192.168.10.x subnet. I created the vpn thru the wizard. and nat is automatically created.. nat (outside,internet) source static any any destination static NETWORK_OBJ_x92.x68.x0.0_28 NETWORK_OBJ_...
