Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
All,I have a pair of ASA 5525 (9.3.1) running SourceFire (5.3.1). I currently have the ASA passing the traffic to the SF via sfr fail-open monitor-only. I'm doing this make sure the rules are being applied correctly. Traffic passes, to the SF, and...
We recently ran into a situation where we upgraded a WAN connection from a T1 circuit to a 5mb Ethernet circuit at one of our sites. As soon as we started using the new circuit, we started seeing input overrun errors on the LAN connection to...
DO NOT attempt this upgrade. Follow Marvin's advice and re-image the modules/sensors ONLY.
We use the FMC virtual appliance and it saved days of work taking this shortcut. We ran into way too many issues trying to upgrade the sensors.
Take VM sna...
Thanks Marvin, I just wanted to make sure it wasn't . . . . .
Run Pre-install for FMC from 5.4.1.8 to 6.0
Sourcefire_3D_DefenseCenter_S3_6.0.0_Pre-install-5.4.1.999-21.sh
Run Pre-install to upgrade sensor to 6.0
Cisco_Network_Sensor_6.0.0_Pre...
I am glad I reached out to you. After looking through your documentation, I have a much better understanding of the process. I had downloaded some of the wrong files because I thought the FMC software was included in the pkg file. I believe I fina...
We are currently using ASDM to manage the ASA and VDC to manage FireSight.
We would like to keep things that way during the upgrade. For now at least.
Can you confirm FMC is the replacement for VDC and will keep this separate and that FTD is the u...
Sorry, PLEASE disregard the last post. I had some wrong information. This is what I have for the upgrade path.
Run Pre-install to 6.0
Cisco_Network_Sensor_6.0.0_Pre-install-5.4.0.999-2.
Upgrade Virtual Defense Center 5.4.1.8 to FirePower Manag...
