Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
It looks like you can't trunk and bridge the same vlan on the CSS. As soon as you include a vlan on a trunk, the CSS wants to tag the packets going out bridged ports belonging to the same vlan. Any way round this?Thanks
Gilles,I tried enabled and disabled. Also tried disabling on the cat for the vlan on the trunk, but the cat still sends the stp frames with the modified mac address as stp is enabled upstream on a different switch. I don't want to turn off stp across...
Gilles,I tried native and non native and changed the vlan setting on the cat so they matched, but no change. The problem is the cat changes its mac address for stp when you enable a trunk and the css doesn't recognise this. The css then bridges the p...
Hi Gilles,CSS is 11506 ver 07.50.1.03The config looks like this:bridge spanning-tree disabledinterface 1/1 trunk vlan 51 default-vlaninterface 1/2 bridge vlan 51Port 1/1 connects to a 6509 on port 3/5 which is a trunk with only vl 51 enabled....
You need to paste the response from Verisign together with their intermediate certificate into a file and then import that file onto the css. Then associate the file so the css knows it's a cert. If the css doesn't like the file, try the paste/import...
