Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I've recently migrated a PIX 525 to ASA 5520, but for some reason (through ASA) the users from OUTSIDE aren't able access services published in DMZ as well as some DMZ servers aren't able to communicate to some OUTSIDE services.INSIDE to DMZ is...
Hi,I have a PIX 525 (6.3) and I am trying to get the VPN pass-through connection working with it.The toplogy configuration is as follows:Juniper Firewall Hosting IPSec VPN <-> (intf: rsa) PIX 525 (intf: outside) <-> LaptopBut for some reason I am una...
Thank you very much Sourav,I did it in a slightly different way and I guess it should be okay.object network inside_subnet_a subnet 192.166.1.0 255.255.255.0object network inside_subnet_a subnet 192.166.10.0 255.255.255.0And so on for inside subn...
Hi Sourav,Sorry I don't want start a new thread, I just have a small query; I've the below global nat/pat configruation in my PIX version 6.3(3) I want to transfer this configuration in my ASA Version 8.4(5), can you please suggest how do I do that?g...
Hi Jouni and Sourav,Thanks to both of you for your inputs, finally got it working.The problem was with the Juniper firewall it didn't have a route to my outside network (10.1.10.0), the Juniper is basically managed by our contractor and I didn't hav...
Hi,I've attached the packet debug of the firewall from inside to rsa and outside to rsa, my pix configuration is similar to the one I posted in the original post except the IP addressess in the original configuration are different. If you need any sp...
