Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA5505, ASA7.1(2), ASDM 7.1(3) which functions as the DHCP server on my mini-network. I have a base computer with Windows 7 installed. WIndows 2012R2 server resides in a VM and Windows 10 on another VM on this same base computer (VMWare)...
i have two of these, one is installed in my home and the other is installed at work. i haveset up a syslog server to capture and store the messages from the 5505. in the asa logging setup i have the severity levels set to filter out the debug and i...
hi marius... i discovered the issue last night... For some reason, the http service policy and the http inspection map disappeared. i recreated them and all is good… the only issue now since it's working is i can't remember how i had it setup to di...
hi Marius,before posting the running configuration... in the configuration -> device management -> syslog setup there are hundreds of syslog id's with their various logging levels set. the problem we've been dealing with is the level 5 messages - N...
i will put a sanitized copy of the running config up but it will take me about 5 more hours before i am able to do so... thanks for taking the time to look at this...
i have checked a few times for an errant setting but i must be blind in one eye and can't see out of the other as nothing stands out as being wrong. not sure what to look for.
that was the first thing i checked. i have logging enabled and the severity level set to Notifications. if i set the trap level to debug or informational, i get the typical flood of messages but no notification messages. this is what i have set fo...
