Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have just purchased a ASA 5505 and have completed the initial setup via the wizard. I am currently unable to access services on the outside of the ASA. The error: 'Failed to locate egress interface for UDP from inside'.... appears when ever m...
Ah. That switch port had gone into error disable before my last test, I have changed the cable and the interfaces are now clean of errors. (Apologies)I have now retested and its working! I have double checked and it looks like my issue was all down ...
Yes, I did delete the incorrect route, and also applied the configuration. Here is the output:Result of the command: "show run route"route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 Result of the command: "packet-tracer input inside udp 192.168.10.10 53 ...
Hi Marvin,Thank you so much for your reply, I have changed the route as per your recommendation and applied the configuration, however I still get the same results with the packet trace. (no-route) No route to host.Any thoughts?Thanks.
