Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to access my camera DVR from outside my network. I have set static and access-list rules and cannot connect. Can I get some assistance? PIX version 6.3(5)
ETA; it is working. I changed the DVR IP and added: (xxx.xxx.xxx.xxx) is the outside interface IP.static (inside,outside) tcp xxx.xxx.xxx.xxx 8200 192.168.1.52 8200 netmask 255.255.255.255static (inside,outside) udp xxx.xxx.xxx.xxx 8200 192.168.1.52 ...
I have used what is above and also other variations including; access-list dvr permit tcp any xxx.xxx.xxx.xxx outside eq 8200access-list dvr permit tcp any xxx.xxx.xxx.xxx outside eq 8016access-list dvr permit tcp any xxx.xxx.xxx.xxx outside eq 8116a...
Yes the xxx IP is the IP assigned to the outside interface. Second question; I need various IPs to access it so management can access the DVR from home/phones etc... Thanks
I have added the following with no luck. static (inside,outside) tcp xxx.xxx.xxx.xxx 8200 192.168.1.13 8200 netmask 255.255.255.255static (inside,outside) udp xxx.xxx.xxx.xxx 8200 192.168.1.13 8200 netmask 255.255.255.255static (inside,outside) tcp x...
