Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,it is running ASA 9.1(5) on my 5505 and I can connect a VPN with my iPhone/iOS 9 over IPSec. Since iOS 8 it shows a connection on both sites but I can´t access to my network-components in my home-network. Does it need a new setting since Apple ...
Hi,my network layout is like this:To reach my webswerver I made a static NAT-rule for DMZ webserver/outside. At this moment it is no more possible to build IPsec-connection from my iPhone to the inside-network.What can I do?regardsJürgen
Hello Fabian,I found the packed-tracer. It seems packets are dropped because of ACL-rules - look at these results for outside and inside interface:___________________________Result of the command: "packet-tracer input outside icmp 20.20.20.1 8 0 170....
Hello Fabian,there is no Router - I use the ASA as a Router. I have a Cisco EPC 3212 from my provider and there behind is the ASA 5505. Behind the ASA are two switches from Netgear (GS108E and GS108PE) - I think they are not L3 devices. The VPN with ...
Hello Fabian,yes there some different layer 3 devices behind the inside interface such as NAS, PC´s, webcam...Now I take the ASA Version 9.2(4) with the ASDM 7.4(3) and I reset the whole system. Then I started the IPsec VPN Wizard. With this I can bu...
Hello Fabian,thanks for your reply. I use the Built-in VPN Client on my iPhone.Syslog of connection prcess is attached.Here are the results:Result of the command: "show run nat"nat (inside,outside) source static any any destination static NETWORK_OBJ...
