About yuzaimee_yahaya

yuzaimee_yahaya · 01-29-2022

Hello,I have the issue regarding SI Network Feed for iprepFMC upgraded from Version 6.5 to Version 7.0.1 I created a simple http server to feed my NetworkFeed. On FMC version 6.5.0.2, it is working fine. Update from feed will execute every 30 min. Bu...

yuzaimee_yahaya · 05-24-2022

Hi, Uisng iping, i get the reply. However when I do ping command, the endpoint not reply. Let say 1 endpoint is on vlan 26, this endpoint can communicate on ip within vlan 26 only. Other vlan will failed to ping to this particular endpoint only. ...

yuzaimee_yahaya · 05-17-2022

we fixed by upgrade to 7.1.0 (build 90) you can check before performing upgrade to 7.1.0 (build 90) by using tcpdump and ensure that POST request is performed by FMC. Supposedly FMC using GET Request to url

yuzaimee_yahaya · 02-08-2022

I have the same question for BIOS Update.We are using FMC 2600 and plan to upgrade from version 7.0.1 (recently upgraded from Version 6.5.02) to version 7.1 regarding bug issue. Since my BIOS Version and RAID Version on FMC is below recommended, I mi...

yuzaimee_yahaya · 02-01-2022

Re-install anyconnect. I had the same issue and re-install clear this error.

yuzaimee_yahaya · 01-30-2022

@Anupam Pavithran Thanks for the info. Currently working with TAC, and still working on troubleshooting . However, TAC testing on labs for version 7.0.1( my fmc is version 7.0.1 upgraded from ver 6.5.0.2) and from packet captured by tcpdump it is ...

Member Since	‎06-03-2014 10:09 PM
Date Last Visited	‎05-25-2022 12:02 AM
Posts	12

User Statistics

User Activity

FMC v 7.0.1 SI Customized Network Feed url Request Method issue

Re: ACI Endpoint is not pinging

Re: FMC v 7.0.1 SI Customized Network Feed url Request Method issue

Re: FMC 2500 Upgrade Questions

Re: anyconnect says VPN client driver encountered an error on linux la

Re: Verifying Security Intelligence Feed on Cisco Secure Firewall