About Rahul Kumar Mishra

Rahul Kumar Mishra · 08-01-2014

hi,I have configured site to site vpn with client's firewall. We have mutually configured 3des as encryption however when I checked ISAKMP SA on my firewall it shows AES-256 as encryption...The vpn is active and the traffic is passing through the vpn...

Rahul Kumar Mishra · 06-11-2014

Hi I have on firewall in a different LAN segment and I want to access that firewall through asdm however I am sitting in outside zone for that particular firewall.

Rahul Kumar Mishra · 05-16-2019

use below command- (more easier) moquery -c fabricExplicitGEp | grep -B10 VPC_vtep_IP

Rahul Kumar Mishra · 08-18-2014

hi Ejaz,You need to allow pptp into firewall inspection.run this command on firewall "fixup protocol pptp"..this will solve your problem.

Rahul Kumar Mishra · 08-18-2014

check privilege configuration.

Rahul Kumar Mishra · 07-18-2014

Source MAC address is never changed if the traffic is passing through same IP subnet (vlan). Here the firewall is in transparent mode and if it alter the source mac address communication will not happen. This is a very fundamental network concept. Ho...

Rahul Kumar Mishra · 06-27-2014

Hi Darron,How is pix1 (172.16.92.20) connected with other PIX? Are you doing static NAT for 172.16.92.20 (being aprivate IP)? if so than will you ensure if NAT-T is enabled on both firewalls. As I can see in the logs on 172.16.92.20 it is not able t...

Member Since	‎06-11-2014 06:17 AM
Date Last Visited	‎11-05-2019 11:15 PM
Posts	54
Total Helpful Votes Received	10

User Statistics

User Activity

ISAKMP SA showing different encryption than configured

Can we enable asdm access through outside interface?

Re: Remote Leaf VPC TEP IP Command ACI

hi Ejaz,You need to allow

check privilege configuration

Source MAC address is never

Hi Darron,How is pix1 (172.16