Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm looking for help from the experts here to confirm some facts:We have a 2600 (yes, still running) at our Edge interfacing the ISP. The last couple days, overnight, the router would just stop routing. All links were up, router was accessible....
In our case, in addition to http Server being enabled, we also had SNMP private RW wide open. In the process to resolution this was removed. We haven't had a problem since.
Ross, Curious - do you have "ip http server" in your config file? I just realized this is on, and upon testing, I can access the router web server from the outside world. Using admin/<<enable pw>> I can run any config command I want via the web GUI, ...
Ross, I've done a couple things today to try to troubleshoot. If I can't figure it out on this next outage, I'm simply going to replace the unit, seeing how this one is at least 15 years old and EOL. 1. I power-cycled the router so sh ver shows a pow...
Ross,That exact behavior is what we're experiencing. Startup config isn't touched, and run config gets no ip def and no ip routing added to it. A reload or restart fixes it.Richard,These are good suggestions; thank you. One of the first things I trie...
