Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We notice that our PIX logs (handled by a Linux-basedsyslog) do not contain all of the accessed URL's recorded by our Apache HTTP server. Are there any known problems in this area?Bill
I'm trying to combine a static (inside,outside) mapping for a machine, and also use the same outside address for PAT. Originally I made the mistake of using the old form of the static command, which I guess allocated all the ports from the start, and...
We have FTP servers on the inside and DMZ of our 515E running 6.2(3), with static routing through the firewall in every direction. We observe regular failures accessing the servers from both outside and inside. The faults concern the data transfer, u...
Scott,Yes, it was the "inbound" that had me wondering. I had assumed that it really meant the direction of the TCP/IP connection. If you were to read just this portion of the log, you might mistake this for PASV protocol, which we did and which amaz...
Good morning Scott!I've tried all sorts of variations 'overnight' with no luck. Finally I reset my original config, and rebooted, and everything works! This was the first reboot I had tried because of operational constraints. I guess we would hope...
Scott,I'll try something more in the morning (I'm 8 hours ahead of you). I have switched the NAT to another PAT on an unused external address, and this works OK, but we really need to NAT to the larynx address.Is 'clear xlate' sufficient to restart ...
