Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning,I am trying to install a new ASA 5515-x (OS 9.1) firewall in place of our old PIX 515-E (OS 6.4) firewall and I am having some difficulties. I've been reading through the forum and I have found other people who are having issues with m...
Jouni, you are a genius!! Thank you, thank you, thank you!!I created a new network object and configured it with it's own NAT rule as you suggested above and everything is now working correctly from the inside and the outside.I did the swap live, wi...
Thanks for the offer Jouni! We tried again last night and made some headway. I changed one of the NAT rules from:object network WEB-02nat (DMZ,any) static 11.11.131.114to:object network WEB-02nat (DMZ,outside) static 11.11.131.114And suddenly we we...
Hi Jouni,Your idea about changing the mac address on the new firewall to match the old one worked!! Unfortunately, after working properly for about 2 hours, I suddenly lost access to my web server again. I could ping all of my other IPs, but not th...
Hi Jouni,Here is the info I got from our ISP. Protocol Address Age (min) Hardware Addr Type InterfaceInternet 10.10.56.205 0 xxxx.de26.8073 ARPA VlanInternet 10.10.56.204 0 yyyy.46e8.c09d ARPA VlanInter...
Hi Jouni,I just spoke with someone at our ISP. They said that on our interface on their router, we have one VLAN that is configured for both of our Public IP subnets. They then use layer 2 trunking to get it to a Cisco 2950 at our site. We have on...
