Download 'AP350-Cisco-IOS-Upgrade-Image-v2.img'Load it, this will convert to IOS. Then upgrade to IOS release you want to configure it. I have used this for VxWorks 12.05. I believe some release notes says to downgrade to 12.03, but I am pretty su...

What IOS version are you using? I have experienced similiar problems with IOS 12.3.8JA2. Cisco TAC think this will be resolved with 12.3.11JA. A workaround I found with this problem is to stacically configure the ARP entries on the divices trying ...

Hi Sushil,You maybe correct, this may work. I have never tried to get a non-root to talk to a repeater. From my experience I found that the repeater is responsible for authenticating the remote clients. It doesn't just 'repeat' the RF. Thanks for...

Put in two different commands in order.dot11 dot11Radio 0 linktestsh dot11 linktest- You can tweak the linktest to run so many packets, data rates, etc.Zak

I don't think this would work. A non-root needs to talk to a root. Plus the bigger problem maybe how one radio points in two different directions. Remember only one antenna works at a time. I would recommend putting a 1242 in the middle and utili...