Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there.I hope that somebody can give me a clue of this. I was looking for information for ASA OS like Cisco Feature Navigator provide it. I need to know for example which version are either ED, LD, GD or DF.Thanks in advanced for the information!Re...
Hy everybody,I have some doubt about the configuration of access-list and the security-level in the interfaces. In my configuration I'm using access-lists in all the interfaces (cisco asa 5525, IOS 9.1) and i'm using the same security-level for all t...
Hi everybody,I'm having a weird behavior in a connection. My connection is TCP originating from inside to outside. A few times from outside there are Reset packet coming (for this connection originated from inside) that don´t pass through the ASA gen...
Dear,I have a ASA 5520 with nat Control enabled in my job. This firewall is very critical for bussiness process, so I'd like to confirm with you what happen if I disable this control. This command is an update legacy of the IOS version from a Cisco P...
The NAT-D just apply if exist a device that make just PAT? If there is a device that apply NAT 1 to 1 (for example an static NAT), also apply NAT-T?Thans in advance for the answer.Best Regards.Javier
Hi everybody!I have the same problem but the version that we are using is the 5.0.01.0600. Somebody know if this version has some bug?Thanks in advance.
Thank you very much Jouni for your quick answer!Is there an official documentation about this? I was researching this for a while and I couldn't find nothing about it. Cheers.Javier
Hi JouniFirst at all thank for your response.This connection is originated by a server from the inside to a PC on the outside. Because the ASA don't send this TCP reset (of the client from the outside) to the server located in the inside the socket t...
Zujalal,I didn't understand why is going to be a problew if you are using dynamyc routing and you don't have stand by ip configurated. Why is going to be duplicated routes? Would you be more especific?Best regards.
