Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Cannot get a static route to work for a single IP to go out of failover ISP gateway, we have tried just about every method of the static command we can think of as well as adding lower metric route's for single IP, etc... no luck, traffic always goes...
Hello all. ASA IOS is v8.22. I have setup overall police (10 down 5 up) on outside interface to match ISP bandwidth (for congestion determination) as well as two rules to put packest into LLQ. First rule is for all traffic to DataCenter and it is...
Hello all. I have recently started working with our ASA 5510 and have learned a lot in the past few weeks. I most recently have updated our IOS from 7.0 to 8.22 and started setting up some QoS.Our setup has two WAN's, (6.6.6.6 and 2.2.2.2). 2.2.2....
I had this same exact problem last month when I tried QoS, couldn't get anything in the shape priority queue. I ended up putting all my priority traffic into the standard priority LLQ queue and then policing the rest of the traffic to 1/5th of the ...
Thanks changed ACL to "tcp eq 80" and still no hit counts on ACL. It gets hit counts in standard priority/police mode, although I went back using standard priority today and I'm having problems making ACL's match that too, so I'm wondering if there ...
Marius, thank you for the help. You we're correct, I moved it to the top and it took effect. However I am know interested in shaping, and am having a problem maybe you can offer some assistance. I have setup shaping on the interface with one prior...
