About Andrea Fabbri

Andrea Fabbri · 09-14-2007

Hi, I am running software version 7.2(2) on an ASA5510.I have configured the appliance in transparent mode to filter traffic from the wireless lan ( connected to the outside ) to the wired lan ( connected to the inside ). In this first test phase I c...

Andrea Fabbri · 10-05-2007

Hi, I'm sorry if I answer you just now to your e-mail. The ASA5510 is working with version 7.2(2) in transparent mode and nat-control is not supported. I enabled :logging onlogging console 7logging monitor 7and this is the logging output :%ASA-6-30...

Andrea Fabbri · 09-19-2007

a.alekseev, I'm sorry but I can't do a new test until next Monday. I planned this new test next Monday morning.Do you want to ask me something else to test ?Thank you very much ! Andrea

Andrea Fabbri · 09-18-2007

Hi, during test phase I enabled both logging and packet capture. In particular the capture shows :ASA-SMICHELE# sh capturecapture ASP-DROP type asp-drop all [Capturing - 190100 bytes]capture ACL-OUT type raw-data access-list TEST interface outside ...

Andrea Fabbri · 09-16-2007

Hi, the application server of the 9010t protocol ( created by Teklogix ) is listening on the 9999 tcp port.Thank you for your help !

Member Since	‎06-04-2007 01:23 AM
Date Last Visited	‎10-07-2020 12:46 AM
Posts	5

User Statistics

User Activity

TCP packet with SYN flag sets and windows size equal to zero

Re: TCP packet with SYN flag sets and windows size equal to zero

Re: TCP packet with SYN flag sets and windows size equal to zero

Re: TCP packet with SYN flag sets and windows size equal to zero

Re: TCP packet with SYN flag sets and windows size equal to zero