Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have strange issue. Trying to bridge a vlan through Cisco 897 router. And the end device I'm only able to ping with 1496 MTU. This is a multicast device, everything works except normal file transfer.
I have set this up multiple times before and using...
Greetings,I installed Cisco 888 4-wire SHDSL. Then suddenly the interfaces stopped working. I had to remove them and set them up again. And for short time they worked. But same thing kept happening.When I put the config below into the router. This er...
The problem was resolved yes. But I would like to know why this is happening. I don't see any logical reason why VDSL ethernet0 interface should be treated differently?
Also why is it when I add this config, and then the problem is ok even though I r...
I rebooted the router. After that the problem came back. I then only edited the MTU on the vlan 20 interface. MTU 1504. After that I can see the problem goes away.
Looking at Cisco1841 router that is working. this is the config.
bridge irb!
!interfa...
One strange thing. I changed MTU on both outside interface to mtu 1550. And then also on the LAN interface to 1550. I then started to be able to ping. I removed those settings. It is still working?!?! So the config is back to normal after I removed t...
This did not help. It is very awkward when you have 100$ router next to this monster that does not have this problem and our customer is really considering to just use that router.
