Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Raman,You are missing timestamps in your flow config. Without start and stop timestamps the flow collector will drop the flows.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-9/command_reference/b_169_9300_cr/flex...
Bob,For GUI - You can create and edit user roles that limits certain feature functionality from within the WebUI. Once logged in find the gear icon at the top right of the UI and select User Management. For CLI - This is not supported. It is not reco...
In version 7.3.1 ERSPAN will be configurable via the WebUI. In 7.3.0 there are some steps that need to be completed via the CLI.So, here is what is needed to be done in 7.3.0.Enable ERSPAN decapsulation first by doing the following :Edit /lancope/var...
Your assumption is correct. The "-" character in the 11th field of the syslog is causing this error. It appears to be sent when no username is provided. You should still see an associated proxy log entry for this flow record in the WebUI. If you do n...
The AnyConnect clients should be exporting nvzFlow to the endpoint concentrator. The endpoint concentrator will then convert the telemetry to digestible Netflow(IPFIX) and push the telemetry to the Flow Collector. From your inquiry it sounds like the...
