About schelec

schelec · 07-23-2004

HelloDoes anybody know, when PDM 4.0 will be available for the PIX 515E.Thank You

schelec · 04-26-2004

HelloI have the following Configuration:Inside interface: 10.55.28.254 255.255.255.0 (Subnet 10.55.28.0)Outside interface: 193.222.100.5 255.255.255.0 (Subnet 193.222.100.0)The route outside 0.0.0.0 0.0.0.0 193.222.100.26 1 is set to my router.The re...

schelec · 04-28-2004

Great - it works! Thank you very much!The only little problem is now, that the PDM 3.0 tells me, that there ist no translation rule for any host or network, if i add a access rule via this tool. What can we do here?Thanks

schelec · 04-27-2004

Thats right. I need the 10.55.28/24 hosts untranslated at the outside. If the above code is the solution, then the documentation - or at least the samples - seem to be not correct. They point to the outside address. Its a little bit confusing...Thank...

Member Since	‎04-25-2004 11:55 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	4

User Statistics

User Activity

PDM 4.0 For PIX 515E

PIX 515E 6.3(3) Without NAT or PAT

Re: PIX 515E 6.3(3) Without NAT or PAT

Re: PIX 515E 6.3(3) Without NAT or PAT