Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
In the middle of updating a pair of FTD 1010's from 6.6.4 to 6.6.5, the upgrade failed due to the HA links going down for some reason during the upgrade. We use a port channel for HA and it was all down. When checking the CLI, I noticed that it sho...
We are going to be moving our FMC FS4000 appliance to a new data center in the near future. Does anyone here have any experience with moving their FMC like this?
I know that the IP and name changes will require us to reconnect all SFR modules, bu...
We are running two separate pairs of FTD 2120's in an HA. We have nothing but issues with HA and deploying policy on them. When deploying policy, it fails with each time, and TAC hasn't' been able to help with this issue at all.
This is a new de...
I'm showing the same issues on all of our 1010's today. Security Intelligence URL: memcap exceeded (loaded 1913477 of 3535927)Is there a workaround for this? We are running 7.0.4 on FMC and FTD's.
Yes the firewalls are directly connected. Ports 7 & 8 were configured as a port channel for HA. From what we could see in FXOS, the ports were operational, but just showed as down. Breaking HA and rebuilding using both the original port channel and...
There is no switch in between the firewalls. Ports 7 & 8 were configured into an portchannel for HA. This configuration worked until the attempted upgrade and then stopped working. Odd thing was there were link lights on port 7 even though the ports...
I ran into this issue setting up backups using NFS. Turns out I had to change Security permissions on the main folder to allow everyone modify access and then it worked.
