Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it only possible to have VIPS defined that are part of one if the defined interfaces / circuits.I have an external and internal interface on the CSS with respective subnets allocated. I want to setup a VIP based on a different subnet and have the ...
I have a pair of 6513's with a CSM in each. These are port-channelled together to provide FT.I have a number of server vlan's defined on the 6500 and 2 of these need to be LB through the CSM.Do I define these servers as CSM server vlans (which I have...
State transitions is simply a cumulative counter that indicates the number of times the service has gone from active to suspended etcConn is the number of active connections to the service at that time
Do you mean that the VIP does not have to be an IP within either of the circuit Vlan's associated with a port on the CSS.If so, how does traffic get to the CSS...do you just route it from above down to the IP ?
The term client vlan actually represents an interface between the CSM and the 6500's L2 and L3 vlan.If you have multiple routers connecting to your 6500, they will be associated vlan(s) n the 6500 as any other vlan is...you define the balanced server...
I am having trouble pinging from an interface on the sup720 / switch fabric on a different subnet to a server on a vlan defined in the CSM as a server vlan.Not seeing any hits on the csm for this serverfarm.You said the servers can be on either the C...
