Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Actually pulling the jumper won't erase the flash.you need certain software to do this which we do not distribute to the public.You should be able to password recovery using np disk by tftp. I suggest to call TAC to get the file.
If you set up "access-list acl_in permit tcp 10.0.0.0 255.0.0.0 any eq www" and "access-group acl_in int inside",you allow 10.0.0.0 network to access any network for port 80 which includes all the interface network (all DMZ). Make sure the PIX have ...
PIX does not yet support V6. Unfortunately we do not have immediate plan to support the v6. Since Cisco already offers V6 based router, the implementation will not be difficult but we are waiting for the demand on v6.
PDM 1.11 (current ver of PDM) will work with 6.1(1).Please make sure to reload the PIX after image upgrade from 60 to 611 in order to take a effect. Also if there is any pix/pdm related error please post them too.Thanks,Matt
