We have migrated our WAN connections from our OLD network to ACI and have hit issues with routing loops. Hoping someone here can help.
When we redistribute routes from one WAN route into our core network (now ACI) we used TAGs to prevent routing lo...
Hi,
ACI: we are about to implement ACI and have stumbled across a problem - hoping someone here may be able to help.
We have a multipod setup over two sites connected with dark fibre, a checkpoint HA pair one at each site along with an internet b...
Hi,
I setup the same IP Address as a secondary IP on the L3out on both leaf nodes (under logical interface profiles).
Static routes on the FW's point to that IP Address.
Highly advise you use a different subnet from other L3outs - don't put mu...
that's not much help, that only discusses out bound from ACI being re-advertised back in NOT learned routes being advertised back out.. I think we'll have to look at using a route filter to limit the subnets being advertised back to the WAN routers.
that only helps with ACI routes being advertised out,
what's happening is ACI is learning routes from one WAN router1 removing the TAG and they are being advertises back out of the other WAN Router2.
@micgarc2 I agree it doesn't sound sensible to disable the default loop prevention withing ACI,
So I guess the question is with our scenario what's the best way to prevent loops from accruing? as we can no longer use route TAGs with ACI?