I performed the FMC upgrade from version 6.6.5 to 7.0.4 and for 4 days it is still stuck at 39%. Has anyone had the same problem and would know how to go back to version 6.6.5 or complete the upgrade?
Current Version: 6.6.5Upgrade Version: 7.0.4Elaps...
The serial number of the equipment is not appearing. Could you please validate why does serial number is not being processed in the backend of SNT Portal. Please find attach print.
Hi @DG9,
You must log into your smart account and generate a token and copy it. After this procedure, access the administration of your FPR1010E, go to license, and add the created token.
This procedure will automatically connect the FPR1010E to your...
Will you migrate from ASA to FTD too?If so, yes, you will need to move the NATs to the FMC. You can use Cisco's own Firepower Migration Tool to migrate settings.Hope this helps.
Hi Alan, how are you? It is possible to manage locally via FDM from version 6.2. See below for Cisco documentation and a Cisco engineer video showing how to do it. https://www.cisco.com/c/en/us/td/docs/security/firepower/620/fdm/fptd-fdm-config-guide...
Execute command: "configure manager local" and wait a few minutes to try to access again. Remember to rate helpful posts and/or mark as a solution if your issue is resolved.
