Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have used this Pix 501 at two locations since purchased new 7 months ago (Whats the warranty), the first location had the same problem- Massive Speed Loss(1.5/1.5 was running at 100/300), which the ISP tech support thought the Pix could not handle ...
Thank you for your responses, but today I got my hands on another Pix 501, and it worked perfectly on the first try with nearly no speed loss (pushing over 20Mbit in both directions), Apparently I have been fighting on and off for 6 months to get the...
pixfirewall(config)# show icmpicmp permit any outsideicmp permit any inside(I turned them on while troubleshootingSpeed test ran from Windows 2000 serverSpeed Tests ran from http://chi.speakeasy.comSorry I can not tell you what port, the long line of...
Thanks for you reply,I have made sure all logging is turned off, and debug is off as well, still no luck.... speeds are pitiful, running a speed test to an area speed test (chi.speakeasy.net) away from my service I can hit in excess of 25000/2500...
Show Int (External IP addressed Changed)interface ethernet0 "outside" is up, line protocol is up Hardware is i82559 ethernet, address is 000d.bc71.5a42 IP address 66.12.12.82, subnet mask 255.255.255.240 MTU 1500 bytes, BW 10000 Kbit full duplex ...
