Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am configuring the ACE for bridged mode. However, the real server is seeing VIP IP but not Client IPs. Our business requires that the real server must see client IPs. Do you have any idea how to set that up?I tried to turn ON/OFF normalization but ...
Hi David and Jim,Please correct me! Here is my setup details:Real server is a VMware box. ESX VM is setup with VLAN 21 for 192.168.71.x subnet.One the ACE, I set Gig1/1;1/2;1/3 as Ether-channel and all VLAN trunk to another switch, and that switch co...
Jim,Can you tell me David's setup is in bridged mode or one-armed mode? Since I have identical with his setup. My Client VLAN, Server VLAN, BVI and Real Server IP are on the same subnet and all are using default gateway on the ASA firewall.Thanks,Vi...
David,Do you have only < ip route 0.0.0.0 0.0.0.0 172.31.0.1 > in your ACE or you have more than ip route statement for each different subnet if you have servers are running on different VLAN/subnets?Thanks,
