Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I use a bunch of RV042 (V3, lastest firmware) to connect to local networks over an ipsec-vpn.
As there is a separate router to handle the internet-connection, the RV042 has to do NAT-T, which worked well for years. ( Both sides of the VP do NAT-T.)
R...
I'm running a bunch of rv042's ( V3).
Unfortunately, the sometimes loose the VPN and don't reconnect on their own.
To fix this, it is neccessary to reboot the device.
I have a linux machine in each network, which could send commands to the router.
...
Hi,I'm running a vpn-network with several rv042. Some are V1, some are V2.Prob 1)The latest firmware for V1 shows a request in the browser about some suspicious website-certificate. Seems like my browsers don't know how to get the full chain of the c...
The problem was not solved.
On customer called your support and the config was checked, but no errors found.
The VPN breaks down after the "T-NAT: new mapping" entry.
If I use router-vpn of fritzbox or openwrt, the VPN is completely stable. Unfortun...
Thanks for your reply. Due to legal reasons, we cannot share one dyndns account, so the bill will be $20*50 = $1000.As more than 50% of the routers are RV042 V1, I doubt, there will be any support from cisco for this routers I bought 3 years ago.Beei...
I'd like to ask whether any new firmware for RV042 can handle an actual dyndns replacement ?Dyndns is shutting down its free service on 5-7-14, and I suggested my boss to go with more than 50 RV042s instead of a openwrt solution. Well will not buy 50...
But what should I do with the V3 of the Rv042 ? Can I also downgrade to get rid of this feature ?BTW: When visiting this forum, I also get complaints about invalid certificates mcctags.cisco.com. I would not expect this kind of warnings in a...
Same problem on my rv042. I had to downgrade the V1 to get around this problem. But the V3 rv042 allways brings up this requester. Can I get a firmware without this "feature" ? I use remote administration from many different browsers (smartphone), s...