Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HI all,I have a single FTD (managed by FMC) with two ISPs.I have the public IPs on the FTD and the ISPs are giving me the public IPs via PPPoE.I want to configure failover of the ISPs. My first option.From my knowledge this can be done with route SLA...
Hi aibhatna,I also tried the trial version (today 31/1/22) and i get also the time-out.Do you have an estimation date on when this issue will be fixed?Thanks
Hi,I face exactly the same problems with FPR 1010 and PPPoE, and the solution of changing the MTU to 1508 (for me it works for any value greater than 1500) works, but when i do a restart it stops working (although the MTU value remains as i changed i...
Hi all, we have exactly the same issue.Asymmetric routing by design.Resolved tcp connectivity with tcp_state_bypass, but we have problem with icmp (ICMP Inspect seq num not matched).Opened ticket with TAC and the response was to disable icmp inceptio...
It seems that from version 6.3.0 and on, it is supported to configure HA from FDM.https://www.cisco.com/c/en/us/td/docs/security/firepower/630/fdm/fptd-fdm-config-guide-630/fptd-fdm-ha.html
