About Rigels002

Rigels002 · 03-20-2023

Dear Community, My client wants to open remote desktop port 3389 on the fpr1120. I created static nat with port forward from outside to inside to forward incoming request on port 1616 to ip 192.168.**.** on port 3389 windows RDP and an acl to allow t...

Rigels002 · 03-20-2023

yes, x.x.x.x is my FTD outside ip address. i fixed it, tried everything but just had to change the placement of the NAT - above a specific rule - above inside_outside dynamic nat rule. Static nat should be place above dynamic nat. i was able to get...

Rigels002 · 03-20-2023

Rigels002 · 03-20-2023

i did that but still not working. i need only to for remote host port 1616 to connect via remote desktop on port 3389. Static manual nat is bidirectional so should work both directions. dont understand why cant figure it out.

Member Since	‎10-25-2017 01:57 AM
Date Last Visited	‎03-20-2025 01:13 AM
Posts	4

User Statistics

User Activity

Cannot open RDP port on FPR1120 from FDM

Re: Cannot open RDP port on FPR1120 from FDM

Re: Cannot open RDP port on FPR1120 from FDM

Re: Cannot open RDP port on FPR1120 from FDM