Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
That is correct. You would be re-acking the IOM module(s) one at a time on the subordinate FI and not the whole chassis. There should not be an expectation to impact production data flows traversing the Primary FI.
Thanks,
Expansion Modules function like line cards on a Nexus Switch. They end up with unique numbering. Example Server Port 3/1 will be port 1 on the 3rd module (2nd expansion slot though since the the base ports on the 6296 are technically module 1). On...
All syntaxes follow the same interpretation. The period of time last however long and then the one with the H is that period of time prior to it.
So 15Min is the last 15 mintutes. 15MinH is the 15 minutes before that. Etc. etc. etc.
The breakdown of the fields are as follows:
1Hour - the current count for the current hour (past 60 minutes).1HourH - This is the historical count for the hour prior to the current hour (past 61-120 minutes)
1Week is for the current count of the curr...
When migrating from 62xx to 64xx, the UCSM database will maintain the configuration from the 62xx and apply it to the 64xx. In the event of server ports (and all ports really), this will assume that interface 1/20 for example goes to the same exact ...
