Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a document that explains how the configurations are updated to the standby ASA and what needs to be manually added tot he ASA? I have two ASA 5510 running ASA ver 8.3(2) and ASDM 6.4(1). When I add static routes to the primary ASA the rout...
I am building a Extranet with16 internal VLANs that need be routed on my ASA5520 in a HA configuration. After the external and failover interfaces I have two interfaces remaining to for my 16 VLANs. What I would like to know is what is the most eff...
We just installed ASA Version 8.3(1) and I a little confused by the "System Resources Status". It shows my memory usage at 3902MB of 6000MB. My total memory is 2048MB under “Device Information” which is accurate. What is the 3902MB of 6000MB? The...
Varun,Here is the info you requested. Thanks for the help.John RSTNAGFW3# show failoverFailover OnFailover unit SecondaryFailover LAN Interface: Failover Ethernet0/3 (up)Unit Poll frequency 1 seconds, holdtime 15 secondsInterface Poll frequency 5 s...
Varun,Thanks for the links. In look at my problem some more and I discovered that none of my updates are not being synced with the standby ASA. I created a network object on my primary ASA and applied the change and it didn’t show up on the secondar...
The route command shows different routes. I can not find the static route anywhere in the standby ASA. Also the standby does not have any of OSPF routes that show on the primary. The show OSPF command does show the same info on both ASAs.
I was using ASDM to make the changes and did save the config. When I looked at the failover in ASDM and both the startup and running configs I did not see the static route added from the Primary. John
Yes, I will be running 8.4.1 on two ASA 5520 in an Active – Standby mode. I am required to use the ASA by our security team for all routing on our Extranet so that all traffic is restricted by policy as required. Some of the VLANs are required to ...
