Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a 515 pix with 3 interfaces (inside, outside and extra), and I would like to configure the extra interface to negociate pppoe, this will be a kind of a second outside interface (security level =0), but seems that just the outside interf...
Hello, I am trying to set a vpn from a 805 (12.3 with ipsec 3des) router with dynamic ip to a 515 PIX Fw (6.2) with static ip. Seems that there is a easy way to do this if you use Easy VPN like the example in this link http://www.cisco.com/warp/publi...
Hello everyone, I recently upgrade my pc os from win98 to winxp, so I use to connect to my pix 515 v 6.2, PDM v 2.1 with IE 5.5. Now with IE 6 sp1 I can not go far from the window:loading pix device manager please wait, i do send my password but afte...
Hello, I would like to know if there is a way to load balance the outgoing traffic from the server´s farm to the clients through several default gateways, or at least return the incoming traffic from their respective router.There are several commands...
its seems to be related with the lifetime of the session.you can check it withsh crypto ipsec security-association and you can change it withcrypto ipsec security-association lifetime 3600 (3600secs i.e.)
thanks Joseph, I am running Pix OS 6.3 and seems that this version allows to configure pppoe as a client, it works also in 515. I had not tried to configure both interfaces in security level= 0 by command line, let me try if this is possible.regards
