Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a subnetted class C as our inside network on a pix running 6.1. We are attempting to communicate with another subnet of that same class c on the outside, with no success. Does the pix recognize classless routing? If not by default, how do ...
Steve... thanks for all of your help.. RIP2 won't be an answer, cause they don't want it on in the dmz.. We are thinking TAC, and trying out NAT now(I'm waiting on the fw changes as we speak).. I hadn't considered a tunnel.. so that's an idea too...
no, the pix cannot ping 208.242.100.65 either. We are verifying all the server subnet masks right now(tho I know the router mask is correct) and will test again.. If it still fails, ideas?
ok.. yes the dmz rtr has routes to 208.242.100.65/27 255.255.255.224 and ip classless.. and a route to 208.242.100.128/25 as well... below is the info from the debugs:f1-diadptc#debug icmp trace (this is from an address that has a src which has the...
ok.. on the router.. the inside interfaces are serial links-we are natting unregistered addresses from our remote sites to registered before they enter our dmz to access other hosts on that network.. there is no natting currently setup for any 208.2...
