Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear Cisco Experts,
We have a bit unusual task - need to allow RDP access from PC outside one ASA to PC outside another ASA via inside network. See attached drawing.
For the moment I'm able to establish RDP sessions to/from test machine as shown by g...
Hi Experts,
For the moment we have PC-based firewall (Debian + iptables) to segregate 2 private networks but there is a demand from management to use Cisco instead.
Unfortunately our configuration is a bit unusual so for the moment I'm stuck with...
Hi Cezar,
Thanks for pointing me in right direction, I got it working now!
The problem was with missing routes to "outside" networks on both firewalls.
Cheers,
Yuri
Hi Cezar,
Unfortunately we could not avoid NAT. My drawing was simplified - actually we have 50+ special devices behind TA-FWL on 10.3.117.0 network which must be accessed from main server 172.16.8.111 via single inside IP of firewall. So we used NAT...
Yes, it did help. I made "write erase", reloaded ASA and declined proposal to restore to factory defaults.
Once ASA looks clean I've put your configuration and it works perfectly!
Thanks a lot for your help on this matter, please have a look at fin...
Hi Bogdan,
For sure I do not need bridge groups because will be using only 2 ports (Gigabit 1/1 for outside & Gigabit 1/2 for inside) between 2 networks. However if I delete BVI interface from CLI and assign 172.16.8.201 to Gigabit 1/2 then I could...
