I need some help here please.After the router accepts 10 clients, it just stops handing out IPs. I get the default windows IP for any machine after the 10th connected.Any ideas on what I should look for?thanks.
I've looked on HP/Compaqs site for help with this and find nothing. Maybe someone here can help. We've gone from at Netgear ME102 to the Cisco 1200AP. All the machines in the company can see the new Cisco and get authenticated except for these 2 H...
Chaging encryption seems to have helped tremendously. I've been reading alot of posts about how people have taken encryption completely off and they get IPs so I chenged from 40 to 128 (good idea anyway) And went from WEP to Cipher Mode. Cipher is se...
Chaging encryption seems to have helped tremendously. I've been reading alot of posts about how people have taken encryption completely off and they get IPs so I chenged from 40 to 128 (good idea anyway) And went from WEP to Cipher Mode. Cipher is...
DCHP scope has plenty. 153 IPs to lease out, we are a small office of 30 employees with at the most 60 IPs leased. DHCP works fine with everyone connected via hard LAN, but when we go wireless, the fist 10 get on. The rest get windows XP default IP...
Hey Paddy,I thought so on leaveing the AP with Static.. thanks for verifying that for me. DHCP comes from the server not the AP. Do I have to configure the scope from the server that gets passed through the AP or is there a setting on the AP that a...
I'm having a similar problem with about the same configuration. My security is set to 40bit Hex WEP. Anything over 10 connections, the 11th can see the AP but can't get an IP from it.I've configured the AP with a Static IP, maybe I should set it DH...