Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have a Cisco ASA 5520 that we've just connected up to a 100 Meg internet connection. Speedtests can only get to 10 Meg, but if I bypass the ASA I can confirm I get up to 99 Meg up and down.The service was previously connected to a 15 Meg interne...
Hiwe have an asa5505 firewall on version 8.2 it currently works fine we're going through the proces of migrating to a mew ip range, but when we change the NAT entries, the pings to the public address return the inside ip address!!! Help!!the curre...
HiI'm just using speedtest.net. When I direct connected it to the provider NTU I got the rates up in the high 90s, but through the ASA down at 10 Meg. I'll run up iperf and test.ThanksChris
Hi WalterDone, but it still makes no difference - 10 Meg through.Vibhor - this device runs at around 5% CPU, and 212 Meg memory. We're not seeing any interface errors.ThanksChris
Hi VibhorNo, there is no IPS module on the device. Here's the config:=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.10.02 15:05:40 =~=~=~=~=~=~=~=~=~=~=~=User Access VerificationPassword: Type help or '?' for a list of available commands.macmillan> EnPasswor...
HiIt's a 5505 running version 8.2The ping test was to ping 192.168.220.241. In the original config it replies as 192.168.220.241, but when we do the change and ping the same ip address, it replies as 172.18.148.16....I'll try the other thing you reco...
