Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have 2 N7KsN7K-1 have 2 VDCs, D1 and D2N7K-2 have 2 VDCc S1 and S2D1&D2 have vPC configured between them and S1&S2 also have vPCs b/w them.What is the best practice to interconnect D1&D2 to S1&S2 with redundancy ? I am yet to see a Cisco Doc...
Hi All,We have a two ACE module running in a redentant setup in CAT-6500.The software version is Version A2(1.6a) [build 3.0(0)A2(1.6a) It has started giving many issues lately, promtping us to think of asoftware upgrade. Please advice, which ver...
Hi,The context was configured for Load Balancing Port 80 and 443 traffic before the SSL Configs was Applied.The SSL Termination is configured on ACE module running the software version A2(1.6a) [build 3.0(0)A2(1.6a)The load balacing is working witho...
Hi, I have two vlans defined on the FWSM, APP and DB, For the APP vlan, Sec level is 60 for DB it is 100. I wanted to allow multicast from APP to DB and Vice Versa. The necessary NAT statement and ACLs are updated and connectivity is working from D...
Hi,I am trying to make the Multicast working between two vlans defined in FWSM..Hosts are running mysql cluster and Multicast is used to send master/slave status information to the IP 228.10.10.10 on port 45566.The vlan is defined in FWSM and the ho...
With "mls qos" OFF the switch does not modify any markings.- With "mls qos" ON the switch clears all COS, ip-prec, and DCSP, unless the trust configuration was specified.
N7Ks are used at single customer site.D1&D2 are collapsed core-dist switches (vdc), where access switches will connect and S1&S2 are server farm vdcs where fex's are attached.7k1 7k2S1------S2D1------D2
