Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi , In our environment having ASA 5545 ( IOS Ver 9.1) Firewall and In there AES 256 CBC cipher encryption is enabled for SSH user access.we need to disable CBC cipher encryption and enable the CTR Cipher encryption for SSH users.Kindly help me fo...
Hi,We are Having ASA 5525 firewall and Whenever I am performing traceroute passing through the firewall and i am not getting any hop count after firewall( Firewall IP is also not shwoing in Trace Route.ICMP I had allowed and also configure ICMP in t...
Hi,We are having two pair of NIPS SSP and working in Active and standby mode.All four Devices (ASA 5545 and ASA 5525 SSP IPS) showing CPU utilization 100% on both active and standby devices.Memory usage is also showing very highly utilized.Kindly hel...
We are haing ASA SSM 40 module NIPS at perimeter network. When I keep the IPS in promiscuous mode then eveything is workign fine and when i had configured the same module in inline mode then i am not able to take putty or telnet of the internet rou...
Hi,We are having two pair of NIPS SSP and working in Active and standby mode.All four Devices (ASA 5545 and ASA 5525 SSP IPS) showing CPU utilization 100% on both active and standby devices.Memory usage is also showing very highly utilized.Kindly hel...
Thnaks Prashant for your support..We found that there is problem with default sersor but other Internal IPS with default sersor working properly. We have deleted defaults virtual and created new virtual sensor (VS0). Problem is resolved now.Thanks,Dh...
Hi Prashant,Thanks for your resonse.We are not having real time log anlysis server but when I am checking the IPS event logs, there is not showing any droped traffic for ssh or telnet from my system.Even I have tried to bypass the traffic from the my...
Hi Robert, We are haing ASA SSM 40 module NIPS at perimeter network. When I keep the IPS in promiscuous mode then eveything is workign fine and when i had configured the same module in inline mode then i am not able to take putty or telnet of the in...
