Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I've a test pair of ASA 5510 firewalls that run across sites in an active standby configuration both running asa821-11-k8.bin.However I've noticed that at random times every few days the following messages appear in the log of the primary un...
Hi Guys,Please see below both are subinterfaces off a main.The drops on interface 512 had been examined previously and are L2 drops of Microsoft NLB traffic and there is no congestion on either interface 512 or 647interface Ethernet0/1 speed 100 dupl...
Its worth checking the scurity levels and the logs.If the log reveals 'no translation group found for' it may be that like in the old pix you require a static translation in order to pass from the low level of security to the high.You can in later re...
Hi Ray,Really for your VPN tunnel you need to ensure that you specify the from and to groups rather than a blanket any any..Depending on the transform sets you will also need to premit either ahp or more likely ISAKMP access-list 101 permit upd from ...
