Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings.I'm running a basic ASA 5505 with one outside interface and one inside interface (0/1). For security purposes, I'd like to lock down the inside 0/1 port to the mac address of the host that will be connecting to it. We don't want to run DHCP...
Greetings,I'm attempting to force/initiate a Cisco ASA VPN tunnel connection from a remote location and I'm wondering if there is a way to make the Isakmp and Ipsec SAs come up from either the command prompt or from the ASDM.In the past when configur...
I'm currently using an ASA 5540 with several basic access lists. I'm attempting to view the hit counts on a particular access list, specifically the 'deny any any' on the outside interface. Now, I can actually see the hit counts themselves increasing...
The response I'm about to provide may definitely not solve your problem, but I'm hoping it will point you in the right direction.We had a similar requirement (Anyconnect VPN users connecting and then having to hairpin or U-turn back out for internets...
The default username/password for the Pix isusername - pixpassword - ciscoyou won't lock yourself out. no worries there.what prompt are you seeing when you console in?pix>orciscopix>
The first response on this particular post to the forum pretty much sums up how it's done. I've tried it per this gentleman's response and it does work.https://supportforums.cisco.com/message/880042#880042
