Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,i've a basic scenario that i cant get to work.i have a cisco asa 5505 acting as a firewall/router to our office with single public ip and i have setup PAT to allow all users behind it to access the internet.i've added a static nat rule for http...
below is my running config after removing the sensitive informationResult of the command: "show running-config": Saved:ASA Version 8.0(4)16 !hostname ciscoasadomain-name default.domain.invalidenable password *** encryptedpasswd *** encryptednames!int...
output of the sh run policy-mapResult of the command: "sh run policy-map"!policy-map type inspect dns preset_dns_map parameters message-length maximum 512policy-map global_policy class inspection_default inspect ftp inspect h323 h225 inspect h3...
ok so i enabled dns rewrite on the nat rulebut its still not workingi did a quick search and some results mentioned that dns rewrite depends on dns inspection and some other settings.can you please assist me?
hey,thank you for reply. however my problem is not related to dns or so.because i also can't telnet my public ip (no dns naming) on port 80 from the inside network, yet this can be done from any machine outside my local network.please advise?
