Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,My Firewall is an ASA 5550 running software 8.0(3).I have many times the following message in my logs:"%asa-2-106006: deny inbound udp from 192.168.1.x/138 to 192.168.1.255/138 on interface outside".The range 192.168.1.128/25 is the pool for my...
Hi All,We want to ping all interfaces from an ASA from a monitoring server located in one Management DMZ.It works fine for the interface directly connected to the monitoring server, but it fails for all others,Any ideas on how to solve this issue ?Th...
I agree with you regarding the "logging filter" command.If I well understand your answer, in my case, the log didn't come from the ACL engine.So putting rules with option "log disable", as I've done, will not solve my issue ?Regards,Christian
Thanks for your answer Farrukh.But I don't want to disable syslog message 106006.I only want to disable logging for netbios traffic on broadcast address.Is it possible or not ?Many thanksRegards,Christian
Thanks JorgeBut it doesn't solve the issue.I've already permitted any ICMP on all interfaces and I've already put access rules that allow the monitoring server to do ICMP to all ASA interfaces.This access rule is applied on the interface where the mo...
