Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I'm wondering if a .tcl file would be run automatically each time a tracking state for an IP SLA (icmp-echo) changes from/to up/down? Based on some research, something like (I can't test if this works because Tcl/EEM doesn't work properly with rou...
Has anyone been able to get ingress with RSPAN working on the destination? Something like this:
monitor session 1 destination interface Fa0/24 ingress untagged vlan 1
monitor session 1 source remote vlan 99
I can do it just fine with local SPAN. But...
Hi, having issues getting RSPAN to work properly sending traffic to a PC (nProbe). After nProbe converts the flows to NetFlow and sends it to our collector (nfdump), the collector isn't really adding flows. I see some traffic but they're mainly broad...
Anyone able to get this working before? My output packet numbers on the 2960 vs input on the 1841 are very different. Basically I'm trying to use that SPAN traffic for NetFlow running on that 1841 router. Thanks.
Hi guys, having trouble generating NetFlow data using SPAN traffic. I have a 2960 switch and 1841 router. The router is running NetFlow. The switch is running SPAN with a session destination of f0/1, which the router is connected to.
The idea is to...
Ah I see. I had no trouble using EEM and Tcl separately but couldn't get the namespaces working in Tclsh. I never configured those policy settings. Thanks.
Ah, basically the two files would be doing something different based on the track status, the Tcl tasks are something that can't be done in EEM actions. I'm mainly asking if EEM will actually run the .tcl files if the states changed.
Still haven't been able to fix this even though it's in Cisco's official documentation. If anyone has gotten this working, please post here if you can.
For now, it's just easier to use a second NIC.
