Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, as per the attached configuration the subinterfaces (e.g vlan101 and vlan105) are not communicating with each other, But they regularly go on Internet. What is wrong in the attached configuration?
Hi all, when logging in from the ASDM to the Cisco ASA 5506-X I see the following error on the Java console, and it remains forever loading (after entering the username and password): Using JRE version 1.8.0_231 Java HotSpot(TM) Client VMUser home di...
Hi all, with network topology descrived in this topic:
https://community.cisco.com/t5/firewalls/asa5506-x-enable-comunication-between-vlans-and-remote-managment/m-p/3391711
2x isp routers for internet access with dhcp on lan interfaces and 2 diff...
Hi all, my planned architecture is:
2x isp routers for internet access
1x asa 5506-x
2x L2 switches on lan side
on lan side i've configured the ASA with 4 different vlans (subinterface of the redundant interface) and 2 phisical interfaces to ...
Hi all, i need to configure a network with 1x ASA5506-X, 2x Cisco small business 48 port switches. I've plan to use 4 different vlan's and connect 2 of the 8 gigabit ethernet of the asa to the switches. How can i configurure asa? Subinterfaces? Bvi? ...
I was mistakenly trying to ping from a host on the vlan105 network the gateway of vlan104 with this resultASA-HLSDN# packet-tracer input vlan105 tcp 192.168.10.50 3000 192.168.6.222 80Result:input-interface: vlan105input-status: upinput-line-status: ...
yes, Asa act also as a router (nat-dhcp-routing):on gi1/1 WAN to ISP routeron gi1/7 and 1/8 reduntant interface to 2 Cisco switch with 5 vlans (subintefaces)
I tried without solving to put eg. network vlan104 and vlan105 in communication with these commands:nat (vlan105,vlan104) source static vlan105 vlan105 destination static vlan104 vlan104nat (vlan104,vlan105) source static vlan104 vlan104 destination ...
Only one WAN internet connection on port GigabitEthernet0/0. Multiple vlans (subinterfaces) on redundant interfaces, must be natted to WAN and comunicate with each other.