Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hey guysi upgraded a 515 from pix601.bin to pix633.bin and then put on pdm-301.bin for good measure..both images went on fine. then i rebooted it i found myself in a reboot loop. ;(i then went thru the monitor mode to try with pix631.bin and pix634....
it appears that i may have spoken to soon althought the image loads correctly, and i am able to configure the pix ok, when i reboot the pix, it goes back to giving me the "Checksum verification on compression loader failed" error message again.to ge...
hey boss,that worked perfectly.the pix633.bin image loads without error and then requests the activation keys.i have sent a request off to licensing. hopefully they will respond soon so i can get this box back into production.cheersrob
i think this correct off the top of my head set the static nats static (inside,outside) 216.82.64.40 192.168.2.0 netmask 255.255.255.0 0 0 static (inside,outside) 216.82.64.41 192.168.3.0 netmask 255.255.255.0 0 0 static (inside,outside) 216.82.64....
configuring a pix with no experience will be difficult.there is a gui, but you still need to understand routing principals.the cisco pix gui is called the pix device manager (PDM). you will be able to use it to configure what you want.as long as http...
