Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I just pulled the thing out of the box and powered it up.I put it on our internal network connected a laptop to the inside interface and went through the setup wizard.I gave the outside interface a static address, added pat for the internal systems (...
Really?That is odd then.I typed the command in the (config#) console and it didn't tell me it was already there.And suddenly afterward it was all working.Perhaps a glitch?
Hey, thanks everyone (especially Zdenek) for the great info.I was able to uncover that for whatever reason the PIX was not handing out route information to the laptop on the internal interface. The following command fixed the issue:route outside 0.0....
With the ICMP trace on the pix, i see nothing when trying to ping 192.168.0.111 from the laptop. I see information when I ping 192.168.0.111 from the PIX but I was always able to ping from the PIX.Is there some sort of trace I can turn on to see wher...
FYI:I'm not sure if this changes anything but the laptop connected to the inside interface has NO access outside of the PIX firewall.I can't ping, can't access http, ftp, smtp, snmp,smb, nothing.I can however ping the inside interface of the pix (19...
pixfirewall(config)#show config: Saved: Written by enable_15 at 06:41:15.021 UTC Tue Jan 18 2005PIX Version 6.3(4)interface ethernet0 100fullinterface ethernet1 autointerface ethernet2 auto shutdownnameif ethernet0 outside security0nameif ethernet1 i...
