Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone!
I was trying to monitir ASA from Zabbix by polling with protocol snmp v2c! It was success, exept one thing. I'd like to fetch information about CPU, Chassis and Accelerator temperature,but I failed. When I put on ASA command: - sh snmp-s...
ASA DHCP relay
Hi everyone!
I've got ASA 5506 with FirePower, ver 9.9(2)
I'd like to configure DHCP Relay for client from inside_1 int. to external dhcp server behind outside int.
For example
outside ip add - 10.5.100.2 255.255.255.252
ins...
Ok. I found the source of problem. This is not correctly working DHCP server on Cisco 3750. I think I should change IP Vlan routing to L3 port routed (no switcgport) with routes to ASA internal network or IP gate.
Thanks for your help.
Yes, I agree - I can't see REPLAY message from server. Only request. I saw this guide. There is a BOOTREPLY in context handshake, but I can't see this in my case. Furthermore, I would try to capture packets, like you advised me - capture cap int out...
Hi Rahul!
Thanks for you answer.
I've alredy done debug before. Here is the result:
DHCPD/RA: Relay msg received, fip=ANY, fport=0 on inside_1 interfaceDHCP: Received a BOOTREQUEST from interface 3 (size = 300)DHCPD/RA: Binding successfully added...
