Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What are the hardware and software requirements to get an ASA 5510 into Active/Standby Failover. I realize that I would have to buy at least one ASA 5510 SEC Plus (ASA5510-SEC-BUN-K9). Do I have to buy an identical one to get the failover, or can I...
We are trying to set up multiple VLAN's on one physical DMZ interface on a PIX 515e.The goal is to have separate logical subnets connected to our one, physical, DMZ interface. Here is what I have tried so far without success:On switch-created vlan 3...
Can the ASA 5500 handle site to site VPNs where there are similar IP address ranges on both internal ends. For example:Site_A External IP: 10.1.1.1Site_A Internal: 192.168.100.0/24Site_B External IP: 172.16.1.1Site_B Internal IP: 192.168.100.0/24I r...
What are the hardware and software requirements to get an ASA 5510 into Active/Standby Failover. I realize that I would have to buy at least one ASA 5510 SEC Plus (ASA5510-SEC-BUN-K9). Do I have to buy an identical one to get the failover, or can I b...
That's all that I've found too. I didn't know if they could handle ISL or not. I will make the uplink port on the switch (fa0/24) a dot1q trunk port.I will let you know how it goes.Thanks
