Hi,I have an issue with a pair of resilient CSM's (WS-X6066-SLB-APC) that have been running on a Live Production System for over two years without a problem. We have a resilient pair of 6509's with a CSM and a SSL module in each.About a week ago, the...
HiI have a 6509 with a CSM module and an SSL module installed. A section of the config is as follows (IP addresses changes for security): probe HTTP http request method get interval 5 failed 10 ! serverfarm SF7020 nat server no nat client pr...
HiI have a 6509 with a CSM in slot 3. Does anyone know how to clear the configuration of the CSM independently of the switch configuration.I have tried 'clear mod csm 3 linecard-configuration' but having reported that it has cleared the config, it th...
GillesWhilst I've not managed to arrange an outage to re-enable the power to the standby CSM yet, I have run the 'sh mod csm X tech ft' several times and the HB (tx rx) counter is not incrementing at all. Is this correct?I ran a 'sh ver' and calculat...
Gilles,Thanks for the quick response. I'll give that a go as soon as I can.Are there any known issues which I should be aware of with the CSM's regarding the heartbeats suddenly not been sent?Phil.
GillesCookie stickyness has been discussed and rejected at a higher level with the customer. The client workstations for the load balanced services will not be connecting via proxy servers in this case.If, as you suggest, the vserver for the decrypte...
